RHINO(8)
========

NAME
----

rhino - Driver for Brazilian Microsol RHINO UPS equipment

SYNOPSIS
--------

*rhino* -h

*rhino* -a 'UPS_NAME' ['OPTIONS']

NOTE: This man page only documents the hardware-specific features of the
rhino driver.  For information about the core driver, see
linkman:nutupsdrv[8].

SUPPORTED HARDWARE
------------------

This driver has been tested with:

 * Rhino   6000 VA
 * Rhino   7500 VA
 * Rhino  10000 VA
 * Rhino  20000 VA

All Rhino models are sinusoidal on-line.

EXTRA ARGUMENTS
---------------

This driver support the following extra optional settings in
linkman:ups.conf[5]:

*battext=*'n'::
Default = 0, no extra battery, where `n` = Ampere*hour.

COMMANDS
--------

*load.on*::
Turn on the load immediately.

*load.off*::
Turn off the load immediately.

*bypass.start*::
Put the UPS in bypass mode.

*bypass.stop*::
Put the UPS out of bypass mode.

*shutdown.stayoff*::
Shut down in 3 minutes and do not return.

AUTHOR
------

Silvino B. Magalhães <sbm2yk@gmail.com>

SEE ALSO
--------

The core driver:
~~~~~~~~~~~~~~~~

linkman:nutupsdrv[8]

Internet resources:
~~~~~~~~~~~~~~~~~~~

The NUT (Network UPS Tools) home page: https://www.networkupstools.org/
